Place all command line arguments in .BAT file in a single line. Arguments from the second line will be ignored. Yes, you cannot mine Ethereum or Ethereum Classic with 2GB cards anymore. Disable CrossFire, don’t use Remote Desktop Connection.

100,000,000 are owned by LBRY directly. It will default to a competitive price but you can change it manually. If you look to the left you can see the other orders out in the marketplace.

To do this in the LBRY wallet, see here. Powering up the MinerConnect your machine to the power outlet via the built-in PSU. Then connect your miner to your internet-connected router or switch using a standard network cable. You are now ready to power up your miner.

You can use “config.txt” file instead of specifying options in command line. If there is only one option in the command line, it must be configuration file name. If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.

Claymore’s Dual Ethereum AMD+NVIDIA GPU Miner

Start “EthMan.exe” from “Remote management” subfolder . Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code – much less invalid and outdated shares, higher GPU load, optimized OpenCL code. Improved support for systems with more than 10 GPUs, check readme for “-di” and “-mode” options description for details. Added “-rxboost” option for AMD Polaris cards, use “-rxboost 1” to improve hashrate by about 5% by applying some additional memory timings.

• For revenue, you can go to a public mining calculator to check the current profitability.
• In an average block, this translates to around 1800 transactions.
• Check “FINE-TUNING” section below for additional notes.
• Ethereum is not supported for this pool for now because it does not accept Ethereum wallet addresses, read OP for details.
• As implied fixed order is a guaranteed speed / price for the entire renting period but comes at a higher price.

Anyone care to share command line for supernova? I seem to not be able to get it to start. Eth is just a bit faster reporting steady 30.95MH per card, on top of that I am getting 0.464GH https://cryptolisting.org/ (1.9GH with sgminer) dcr per GPU. Send information and/or inquiries to my PM box. Im using dwarfpool proxy and trying to run it. My miner fails to initialize when I execute it.

The EVGA CLASSIFIED 980ti does not hash ETH much faster than a GTX 970, but it has greater compute power. This difference is shown in the large increase in hashrate for the secondary coin by just increasing the “dcri” intensity value. There is room for experimentation here. Please read Readme.txt or original post of this thread for command line samples, options description and FAQ.

This was the testing stage, to ensure that there were no glaring problems with the blockchain. The source code, and not this file, is the only true definition of the block rewards. Luxor is building infrastructure to support the next generation of digital assets. Then set your limit of speed and the Amount of BTC you would like to spend on the hashing power. Dwarfpool all rejected eth shares, ethermine all accepted.

You can also specify values for every card, for example “-ttli 80,85,80”. You can also specify values for every card, for example “-ttdcr 80,85,80”. “-r 1” closes miner and execute “reboot.bat” file (“reboot.bash” or “reboot.sh” for Linux version) in the miner directory if some GPU failed. You can change the intensity in runtime with “+” and “-” keys and also use “x” key to select single GPU for intensity adjustment. You can also specify negative values, for example, “-ethi -8192”, it exactly means “global work size” parameter which is used in official miner.

Not sure which software to use?

This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry. Fixed possible issue with rejected DCR shares on Nicehash pool. Included EthMan v3.0 which supports passwords and email notifications.

Each pool will have different instructions on how to join and get set up. While we try to work with reliable pool operators, LBRY Inc. does not officially run or endorse any one pool. In v9.x you should find best -dcri value even in ETH-only mode, check “FINE-TUNING” section. If you don’t want to do it, use “-asm 0” option to use old GPU kernels. Miner shows “raw” hashrate, 1% is devfee, other 2-3% can be related to the connection quality, current pool status/luck or/and may be something else. You can also select current pool in runtime by pressing “e” or “d” key.

But you won’t find any mention on whether if the coin is resistance to ASIC or not. Every pool has a different interface but the principle stays the same. You’ll need to go to your pools website and type in your public wallet address. Let us use etheremine pool as an example. You type your public wallet address in the search bar and you’ll be able to see all of the information about your Ethereum mining efforts. In the case of etheremine pool once your balance reaches 0.01 ETH it will get sent to your wallet address that you’ve typed into the start.bat file earlier.

You can also specify values for every card, for example “-rxboost 1,0,10,30”. Miner has built-in straps database, all straps are separated by memory and memory type . Use “-driver uninstall” to uninstall the driver and disable Windows Test Mode.

Mining reward schedule

You can change 30 minutes time period to some different value with “-ftime” option, or use “-ftime 0” to disable switching to main pool. Why pool shows less hashrate than miner? On my test rigs I use miner with default settings and on pool I see about 4-5% less than miner shows (my hashrate is about 800MH/s if I turn on all rigs). Miner shows “raw” hashrate, 2% is devfee in dual mode, other 2-3% can be related to the connection quality, current pool status/luck or/and may be something else. Usually I use “ethpool” pool for tests. Most GPU based mining pools only lists coins that are ASIC resistant.

Fixed issue with -ttli and -ttdcr option for Nvidia cards. Fixed issues with voltage/clocks management for latest AMD blockchain drivers . A bit reduced required GPU memory so you can mine ETH a bit longer on cards that don’t have enough memory. Fixed issue with overclock reset for Nvidia cards. LBRY is a Proof of Work algorithm that uses a mix of SHA-256, SHA-512 and RIPEMD hash functions. This algorithm enables fast and secure transactions on LBRY network.

You can read more on the difference here. Now it is time to rent your hash power from the marketplace. Go to the tab “Marketplace”, to the left of the pools tab.

Depending on your residential electricity rate and the size of your mining operation you may decide to host your rigs with a third-party colocation. Typically the hosting facility will charge a flat rate per kWh for setup, ensuring proper operations, electricity and ongoing maintenance. FPGA’s are a bit more specialized hardware that have higher mining efficiencies than GPU’s for LBRY but also are more flexible than hardware like ASICs used to mine Bitcoin. Supernova requires us to register an account in order to start mining.

best coin to mine with nvidia?

Nvidia cards are better suited for LBC mining and perform very well. The watchdog timer checks periodically if any of the GPUs freezes and if it does, restarts the miner. Catalyst allows miners to get paid directly in Bitcoin instead of LBC.

However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners – do not use this miner, or at least use it on systems without any valuable data. Now remote management is working in read-only mode by default. Coin Guides is a fast-growing cryptocurrency publication that helps users to understand the Blockchain Technology and Crypto Currency. We publish latest crypto news, coin mining guides, wallet setups, reviews, token guides, trading tips, online security and various other aspects of cryptocurrencies.

We may also have tips and more information to help you compare providers. I see only one card via Remote Desktop Connection. Usually only by flashing modified GPU BIOS. Unfortunately, no standard way of doing so. Why miner does not stop overheated GPU immediately? See question above about wrong temperatures.

Nvidia RTX 2060 Overclock

This feature is disabled by default (“-tstop 0”). More value means less heat and mining speed, for example, “-li 10” is less heat and mining speed than “-li 1”. You can also specify values for every card, for example “-li 3,10,50”. You can also turn on/off cards in runtime with “0”…”9″ keys and check current statistics with “s” key.

Will newer drivers have higher/lower hashrate? Why Ethereum hashrate in Dual mode is higher than in Single mode? Hardware feature, accept it as an extra bonus. Read “Readme!!!.txt”, “SAMPLE USAGE” section. There are builds for Windows x64 and for Linux x64 (tested on Ubuntu 12.04).

Improved “-mport” option, now you can specify network adapter IP for incoming connections for remote management. Added pool selection in runtime (“e” and “d” keys). Improved fans management for latest drivers and Polaris cards. Fixed issue with PASC, miner could check some nonces twice. Effective hashrate must be a bit higher now.

Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Unlike traditional banking where clients have only a few account numbers, how to mine lbry nvidia with Bitcoin people can create an unlimited number of accounts . This can be used to easily track payments, and it improves anonymity. I don’t have any private versions with +50% speed.